Proceedings

Publications in Conference Proceedings

2020:
Rai, B. and Wille, K., “Development and testing of High / Ultra-High Early Strength Concrete”, Page 7-8 in Proceedings of HiPerMat 2020, 5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, edited by B. Middendorf, E. Fehling and A. Wetzel, Kassel, March 11–13, 2020.
Hendrix, D. and Wille, K.,The Influence of Simple Polymers on the Dispersion of Colloidal Nanosilica in Ultra-High Performance Concrete“, Page 7-8 in Proceedings of HiPerMat 2020, 5th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, edited by B. Middendorf, E. Fehling and A. Wetzel, Kassel, March 11–13, 2020.

2018:

Vandenberg, A., Bessaies-Bey, H., Wille, K., Roussel, N., “Enhancing Printable Concrete Thixotropy by High Shear Mixing”, in Proceedings of the First Rilem International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, T. Wangler and R. J. Flatt (Eds.): DC 2018, RILEM Bookseries 19, pp. 94–101, 2019. https://doi.org/10.1007/978-3-319-99519-9_9.


2017:

Zmetra, K., Hain, A., Zaghi, A.E., Wille, K., “Finite Element Analysis and Experimental Comparison for Repair of Corrosion Damaged Steel Girder Ends Using Ultra-High Performance Concrete Encasement”, 96th Transportation Research Record: Compendium of Papers, January 2017.

McMullen, K., Kruszewski, D., Zaghi, A.E., Wille, K.  (2017). “A Novel Repair Method for Steel Girders with Corrosion Damage Utilizing UHPC.” Proc. of the International Bridge Conference 17-106, National Harbor, Maryland, USA.


2016:

Xu, M., Wille, K., “Three Dimensional Fracture Material Model for Ultra-high Performance Fiber Reinforced Concrete under Tensile Loading”, in Proceedings of the First International Interactive Symposium on UHPC, Des Moines, Iowa, July 18-20, 2016.

Zhong, R., Wille, K., “Material Efficiency in the Design of UHPC Paste”, in Proceedings of the First International Interactive Symposium on UHPC, Des Moines, Iowa, July 18-20, 2016.

Vandenberg, A., Massucci, D., Woltornist, S., Adamson, D., Wille, K., “Characterization of high-strength cement paste with pristine graphite and heptane-graphite emulsion”, in Proceedings of the First International Interactive Symposium on UHPC, Des Moines, Iowa, July 18-20, 2016.

Roy, M., Hollmann, C., Wille, K., “Effect of Fibre Orientation on Pullout Behaviour of Rebar embedded in UHPC”, in Proceedings of HiPerMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials, Kassel, Germany, March 9-11, 2016.

Vandenberg, A., Wille, K., “Mixing UHPC using Resonance Acoustic Technology”, in Proceedings of HiPerMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials, Kassel, Germany, March 9-11, 2016.

Xu, M., Wille, K., “Three Dimensional Plasticity Material Model for Ultra-High Performance Fibre Reinforced Concrete under Compressive Loading”, in Proceedings of HiPerMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials, Kassel, Germany, March 9-11, 2016.

Zhong, R., Wille, K., “Ultra-High Performance Concrete: Material Efficiency in the Paste Design”, in Proceedings of HiPerMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials, Kassel, Germany, March 9-11, 2016.


2015:

Vandenberg, A., Wille, K., ‘Understanding the Dispersion Behavior of Nano-Pozzolanic Materials in Ultra High Performance Concrete’, in K. Sobolev and S.P. Shah (eds.), Proceedings of NICOM 5, Fifth International Symposium on Nanotechnology in Construction, Chicago, IL, USA, 2015.


2014:

Xu, M., Wille, K., “Calibration of K&C Concrete Model for UHPC in LS-DYNA”, in Advanced Materials Research: Proceedings of the 4th International Conference on Materials Science and Engineering (ICMSE 2014), Jiujiang, China, December 27-28, 2014, Vol. 1081, pp. 254 – 259.


2013:

Hollmann, C., Wille, K., “Influence of fiber orientation on the properties of strain hardening ultra-high performance fiber reinforced concrete (UHPFRC) under direct tensile loading“, in Research and Applications in Structural Engineering, Mechanics & Computation: Proceedings of the Fifth International Conference on Structural Engineering, Mechanics & Computation, Cape Town, South Africa, 2-4 September 2013, ISBN 978-1-138-00061-2, pp. 1721 – 1726.


2012:

Wille, K., “Concrete strength dependent pull-out behaviour of deformed steel fibers,” Proceedings of BEFIB2012 – 8th RILEM International Symposium on Fibre Reinforced Concrete: challenges and opportunites, Guimares, Portugal, September 19-21, 2012, pp. 69 – 70. Full article on CD.

Wille, K., Naaman, A.E., “Preliminary Investigation on Ultra-High Performance Ferrocement,” Proceedings of Ferro10 – International Symposium on Ferrocement and Thin Reinforced Cement Composites, Havana, Cuba, October 14-17, 2012., pp. 251 – 260.

Naaman, A.E., Wille, K., “The Path to Ultra-High Performance Fiber Reinforced Concrete (UHP-FRC): Five Decades of Progress,” Proceedings of Hipermat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, edited by M. Schmidt, E. Fehling, Kassel, Germany, March 7-9, 2012, pp. 3 – 16.

Wille, K., Zhong, R., “High Strength Pervious Concrete,“ Proceedings of Hipermat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, edited by M. Schmidt, E. Fehling, Kassel, Germany, March 7-9, 2012, pp. 825 – 832.

Way, R., Wille, K., “Material Characterization of an Ultra High-Performance-Fibre Reinforced Concrete under Elevated Temperatures,“ Proceedings of Hipermat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, edited by M. Schmidt, E. Fehling, Kassel, Germany, March 7-9, 2012, pp. 565 – 572.

Groeger, J., Tue, N.V., Wille, K., “Bending Behaviour and Variation of flexural Parameters of UHPFRC,“ Proceedings of Hipermat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, edited by M. Schmidt, E. Fehling, Kassel, Germany, March 7-9, 2012, pp. 419 – 426.


2011:

Wille, K., El-Tawil, S., Naaman, A.E., “Strain Rate Dependent Tensile Behavior of Ultra-High Performance Fiber Reinforced Concrete,” HPFRCC6, Proc. 6th International. RILEM workshop on High Performance Fiber Reinforced Cement Composites, Ann Arbor, MI, USA, June 19-22, 2011, pp. 367-373.

Kim, D., Wille, K., Naaman, A.E., El-Tawil, S., “Strength Dependend Tensile Behaviour of Fiber Reinforced Concrete with Deformed Steel Fibers,“ HPFRCC6, Proc. 6th International. RILEM workshop on High Performance Fiber Reinforced Cement Composites, Ann Arbor, MI, USA, June 19-22, 2011, pp. 2-9.


2010:

Wille, K., Naaman, A. E., “Bond Stress Slip Hardening Behavior of Steel Fibers Embedded in Ultra High Performance Concrete”, Proceedings of 18th European Conference on Fracture and Damage of Advanced Fiber-Reinforced Cement-Based Materials, Contribution to ECF 18, V. Mechtcherine & M. Kaliske (eds.), Aedificatio Publishers, Dresden, Aug. 30th – Sep. 3rd 2010, pp. 99 – 111.

Naaman, A. E., Wille, K., “Some Correlation Between High Packing Density, Ultra-High Performance, Flow Ability, and Fiber Reinforcement of a Concrete Matrix” for BAC2010 – 2nd Iberian Congress on Self Compacting Concrete, University of Minho – Guimaraes, Portugal, July 1-2, 2010.

Wille, K., Naaman, A. E. “Fracture Energy of UHPFRC under direct tensile loading”, Proceedings of FraMCoS-7, Fracture Mechanics of Concrete Structures, Cheju, South Korea, May 23-28 2010, Edited by H.H. Oh, O.C. Choi and L. Chung, Electronic Proceedings, pp. 65-72, ISBN 978-89-5708-180-8.

Wille, K., Loh, K. J., “Nano-Engineering Ultra-High Performance Concrete with Multi-Walled Carbon Nanotubes”, 1st International Conference in North America on Nanotechnology in Cement and Concrete, Irvine, USA, May 5-7, 2010.


Before 2010:

Wille, K., “Composite Plate with a Novel Reinforcement Sheet”, 2008 Engineering Graduate Symposium, University of Michigan, Ann Arbor, 2008.

Wille, K., “Zur zeitgleichen Erstellung von Wand- und Bodenflächen innerhalb eines wasserdichten Kellers im Gießverfahren” (On-site construction of a watertight basement in one step of casting“), Proceedings of Doktorandensymposium, 45. Forschungskolloquium des DAfStb, October 2005, Wien, pp. 235 – 238.

Wille, K., Dehn, F., “Micro Analytical Investigations on the Effect of Polypropylene Fibres in fire exposed high-performance concrete (HPC)”, Proceedings of the Sixth RILEM Symposium on Fibre Reinforced Concrete – BEFIB 2004, Varenna (Italien), September 2004, pp. 659-668.

Dehn, F., Wille, K., “Fracture Mechanical Behaviour of Lightweight Aggregate Concrete”, Proceedings of FraMCos5, Fracture Mechanics of Concrete, Vail, USA, Band Vol. II, April 2004, pp. 1097-1103.

Wille, K., “Berechnungsbeispiel III. Bemessung einer Fertigteildecke mit Ortbeton-ergänzung. Seminar – Neue Bemessungsnormen im Massivbau DIN 1055”, DIN 1045-1, DIN-Fachberichte 101, 102. Leipzig 2003, pp. 147-172.